Servo press advantages compare with traditional press:
◆ Speed can be set and changed freely during machining with incomparable production usability.
◆ Compare with traditional press, servo press with less mechanical parts, which is easier for maintenance; speeding up of return stroke to significantly increase production efficiency.
◆ Stoke height and performance can be programmed with production flexibility.
◆ Optimized performance to improve part quality and prolong dies service life.
◆ Efficient drive solution to decrease energy consumption.
◆ Fine turning with hand wheel to greatly shorten die test time.
HMI interface:
◆ Moving curve programme (crankshaft mode, multi-link mode, pressure maintaining mode, single side mode, tick-tock mode, muting punching mode, repeat pressurizing mode, free programming mode).
◆ Production state inspection, preset and counting, etc.
◆ Real time indicating of motor torque, crankshaft angle and slide displacement, etc.
◆ Dies data management system.
Slide performance mode:
◆ General crankshaft performance mode.
◆ Link performance mode.
◆ Repeat pressurizing of short stroke and low speed blanking near BDC to reduce noise, pressure maintaining and pressure.
◆ Easy to achieve control with feeding device.
◆ Proper operating mode is selected by trial operating and programmed freely by customers.
◆ Control function of instant energy releasing during machining.
Servo press advantages compare with traditional press:
◆ Speed can be set and changed freely during machining with incomparable production usability.
◆ Compare with traditional press, servo press with less mechanical parts, which is easier for maintenance; speeding up of return stroke to significantly increase production efficiency.
◆ Stoke height and performance can be programmed with production flexibility.
◆ Optimized performance to improve part quality and prolong dies service life.
◆ Efficient drive solution to decrease energy consumption.
◆ Fine turning with hand wheel to greatly shorten die test time.
HMI interface:
◆ Moving curve programme (crankshaft mode, multi-link mode, pressure maintaining mode, single side mode, tick-tock mode, muting punching mode, repeat pressurizing mode, free programming mode).
◆ Production state inspection, preset and counting, etc.
◆ Real time indicating of motor torque, crankshaft angle and slide displacement, etc.
◆ Dies data management system.
Slide performance mode:
◆ General crankshaft performance mode.
◆ Link performance mode.
◆ Repeat pressurizing of short stroke and low speed blanking near BDC to reduce noise, pressure maintaining and pressure.
◆ Easy to achieve control with feeding device.
◆ Proper operating mode is selected by trial operating and programmed freely by customers.
◆ Control function of instant energy releasing during machining.