J21S Series General Deep Throat Press

Product Features

▸Deep-throat design provides a larger working area.

▸Horizontal crankshaft structure.

▸Rigid clutch with rotating-key mechanism.

▸Manual die-height adjustment with scale display.

▸Type A presses are equipped with an emergency stop function to stop slide overrun between 0° and 135°; light curtain is optional.

Specification	Unit	J21S-6.3	J21S-10	J21S-16	J21S-25A	J21S-40A	J21S-63A	J21S-80A	JD21S-100A	JD21S-125A
Nominal force	kN	63	100	160	250	400	630	800	1000	1250
Nominal stroke	mm	2	2	2	2.5	4	4	5	6	6
Slide stroke	mm	35	60	70	80	120	120	130	140	140
SPM	min⁻¹	170	145	125	60	55	50	45	38	38
Max die height	mm	110	130	170	180	220	270	290	320	320
Die height adjustment	mm	30	35	45	70	80	80	100	100	100
Between slide center and frame	mm	700	700	700	700	710	800	800	760	760
Bolster area (F · B × L · R)	mm	200×310	240×360	320×480	400×600	480×710	480×710	580×860	710×1100	720×1200
Bolster opening (Upper dia × Depth × Lower dia)	mm	Φ60	Φ120×20×Φ100	Φ100	Φ120	Φ220×25×Φ180	Φ200×45×Φ180	Φ200×45×Φ180	Φ260×50×Φ220	Φ260×50×Φ220
Bolster thickness	mm	40	50	60	70	80	90	100	120	120
Bed opening (Dia / F · B × L · R)	mm	Φ100	Φ120	Φ150	Φ200	Φ250	200×250	220×260	260×290	260×290
Slide area (F · B × L · R)	mm	120×140	150×170	180×200	210×250	270×320	280×320	280×380	420×560	420×560
Shank hole (Dia × Depth)	mm	Φ30×55	Φ30×55	Φ40×60	Φ40×70	Φ50×70	Φ50×80	Φ60×75	Φ60×80	Φ60×80
Between columns	mm	162	182	220	350	390	450	450	630	620
Main motor power	kW	0.75	1.1	1.5	2.2	4	5.5	7.5	7.5	11
Outline dimension (F · B × L · R × H)	mm	1545×620×1570	1670×680×1860	1680×845×2025	1790×1030×2070	1965×1150×2300	2220×1350×2600	2220×1380×2650	2530×1555×2990	2550×1610×2990